New Deep Engraving Process

If you already operate a laser engraving system in your business it has never been easier to add deep engraving to your list of services.

A new low cost process is available that will let you deep engrave stainless steel, aluminum, brass and many other metal types in minutes. 

Laser2Etch process from Mike Stover on Vimeo.

Steps to Success

  1. Spray your plate with our special paint
  2. Use your laser at high speed to create an image or text
  3. Run the plate through our chemical wash system
  4. Easily remove remaining paint
  5. Optional color fill to make it stand out 

Fast Processing Time

One of the key advantages is that the entire plate width is processed at the same time as it is fed through the etching unit. The entire area is engraved at the same time regardless of what kind of image you are engraving. You should be able to engrave .01" deep at a rate around 1" per minute. Engraving depth is controlled by adjusting the machine feed speed. 

Low Cost

At a price of only $14,500 this can quickly pay for itself. 

So Simple to Use

Just turn the system on and adjust the speed control based on how deep you want to engrave. 

Easy to Maintain

The unit is a simple roller conveyor that pulls the plates through and sprays the part with solvent as it goes through. 

Safest Chemicals

The engraving unit uses a chemical called Ferric Chloride (40% strength) Ferric Chloride is very inexpensive, widely available and by far the least hazardous chemical used in metal etching. It does not produce dangerous fumes, it is odorless, it is not absorbed through the skin and does not cause burns. $150 worth of this solution may last you an entire year. 

for further details visit  https://advancedidentification.net/plate-deep-etching