The LMM 6000 coating creates permanent black laser marks on metals with CO2 lasers.
IMPORTANT: Shake can well before using. Allow the agitator ball to rattle for at least 2 minutes. Failure to shake thoroughly will result in spitting and clogging of the nozzle. For best results, use when aerosol is between 70 and 90 degrees F.
Application: Aerosol can- spray on
On average one of these spray cans should yield around 2,773 square inches of coverage.
General purpose black marks for most harder metal types such as Stainless Steel, will work on some aluminum grades but NOT recommended for softer metals like Brass, Copper, Pewter, and Aluminum. LMM 14 or LMM 6060 are recommended for softer metals.
Always store your spray cans on their side or even upside down to help prevent clogging. Be sure to shake well before use.
Spray cans can only ship by UPS ground.
12oz Aerosol Spray, 50 grams, 250 grams, 500 grams, 1000 grams, Case of 12 Spray Cans