CerMark LMM 6000 coating creates permanent black laser marks on metals with CO2 lasers. Fiber lasers that can be set to 200 kHz. or higher can be used as well.
IMPORTANT: Shake can well before using. Allow the agitator ball to rattle for at least 2 minutes. Failure to shake thoroughly will result in spitting and clogging of the nozzle. For best results, use when aerosol is between 70 and 90 degrees F.
Application: Aerosol can- spray on
On average one of these spray cans should yield around 2,773 square inches of coverage.
General purpose black marks for most harder metal types such as Stainless Steel, will work on some aluminum grades but NOT recommended for softer metals like Brass, Copper, Pewter, and Aluminum. CerMark LMM 14 is recommended for softer metals.
Spray cans can only ship by UPS ground.